Category: Home Services

Cleaning your pool is an essential part of owning a pool, and not doing it properly can lead to costly repairs or even health risks. Regular maintenance will help keep your pool looking great and running smoothly for years to come. But with so many different tasks involved in keeping your pool clean, it can be hard to know where to start. Here are 11 home services tips about cleaning your pool that will help you get the job done right.

1. Test the water regularly – The most important factor when it comes to taking care of your pool is testing the water regularly. Testing helps ensure that all levels in the water are balanced and aren’t too high or too low for swimming safely. Test for pH, alkalinity, free chlorine, total hardness, and total dissolved solids at least once a week and more often if there has been heavy rain or excessive use of chemicals.

2. Maintain chemical balance – Keeping the proper chemical balance in your pool is essential for both safety and performance of the water filter system. The ideal range for pH should be between 7.2-7.8 with a total alkalinity between 80-140 ppm (parts per million). Free chlorine should be around 1-3 ppm while total hardness should remain between 200-400 ppm and Total Dissolved Solids shouldn’t exceed 1500 ppm or less than 500 ppm depending on local regulations

3. Clean out debris – Leaves, twigs, insects, pollen and other debris can find their way into your swimming pool during storms or windy days making it look unsightly and cloudy if left unattended for long periods of time. Make sure you skim out surface debris at least once a week with a net that’s specifically designed for pools so you don’t damage its delicate lining in addition to removing accumulated debris from the filter periodically as well

4. Shock treat – Shock treating is an important part of maintaining an inviting swimming experience since it helps break down waste biproducts caused by bathers using sunscreen sprays, lotions, perfumes, oils and etc which can cause cloudy water and strong chlorine odors over time without periodic shock treatments

5. Vacuum regularly – Vacuuming helps remove dirt from the bottom of your pool but should also be done on occasion throughout every season when necessary to prevent algae build up along sides walls and steps

6. Brush surfaces – Brushing helps remove built up algae leaving surfaces free from slippery patches that can cause dangerous falls

7.Run filter system– Filters are responsible for removing particulate matter from pools such as dirt, dust particles floating in the water as well sand silt from settling at the bottom forming a layer which blocks necessary rays from getting through causing cloudy murky waters instead

8 .Backwash filter system– Backwashing filters require occasional pressure washing with reverse flow action to reverse particles or organic grind bits back into main lines flushing out any accumulated waste before they become stuck in filtering elements blocking them off completely

9 .Check filter pressure – Pressure gauges measure how much resistance is present within filters due blocked pathways causing loss of suction power meaning regular monitoring will indicate when additional cleaning or repair work needs attention before further damage occurs

10. Replenish chemicals– Depending on weather conditions amount of swimmers using facility as well any additional additives like anti algaes may need occasional replenishing to maintain ideal chemical levels ensuring safe swimming environment free from bacteria growths

11. Save energy costs – Maintaining proper chemical balances plus running pumps at lowest settings needed will save money otherwise lost due high electrical bills caused by higher wattage requirements necessary when equipment runs at full throttle all times resulting inefficient operations.